CL3 Low Duration Grind, Clone, Hemi

CL3 Low Duration Grind, Clone, Hemi
CL3 Low Duration Grind, Clone, Hemi
$47.50/EACH
ItemCL3

Description

  • The CL3 utilizes the -5 duration check, in the AKRA rule package, by allowing a softer ramp rate on the nose of the cam. This design has shown gains in the 6200+ RPM range with minimal loss in peak horsepower.
  • The DynoCams CL3 is legal for the current profile rules for stock classes.
  • The lobes are hardened for extra durability, extending the life of this cam.

Specs

Engine: 196cc OHV Clone, 212cc Hemi Predator
Recommended Class:Unrestricted Stock Classes
Target (MAX) RPM: 6400-6900
Spring Pressure (In / Ex): 10.8 lbs
Valve Lash (In/Ex): .003"
Ignition Timing: 32 Deg BTDC

Profile

IntakeExhaust
Open: 29.15 BTDC65.95 BBDC
Close: 75.58 ABDC41.55 ATDC
Lift: .2245".231"
C/L: 114.0 ATDC103.5 BTDC
DUR @ 50:220.5 Deg223.5 Deg
DUR @ 200:82.1 Deg92.95 Deg

Any camshaft that is not in stock will need to be manufactured. This may cause a delay of 5-7 business days.

Documents