BP2 Grind, Clone, Hemi

BP2 Grind, Clone, Hemi
BP2 Grind, Clone, Hemi
$59.00/EACH
ItemBP2-HT

Description

  • This cam meets lift requirements for stock but has a lot of extra duration producing better horsepower over a broader RPM range. Stock setup can be used, but works even better as a modified cam. This cam will easily allow your motor to turn up into the higher RPM range and will require upgraded spring package if your exhaust and intake systems are upgraded. Billet rod and flywheel required for safety if engine is modified.
  • The lobes are hardened for extra durability, extending the life of this cam.

Specs

Engine: 196cc OHV Clone, 212cc Hemi Predator
Recommended Class:Builder's Prepared
Target (MAX) RPM:7000+
Spring Pressure (In / Ex): 26 lbs
Valve Lash (In/Ex): .003"
Ignition Timing: 32 Deg BTDC

Profile

IntakeExhaust
Open: 39.0 BTDC78.0 BBDC
Close: 76.5 ABDC36.0 ATDC
Lift: .224".231"
C/L: 109.0 ATDC111.0 BTDC
DUR @ 50:246.5 Deg245.5 Deg

Any camshaft that is not in stock will need to be manufactured. This may cause a delay of 5-7 business days.

Documents