233SS Grind, Tool Steel Billet, Flathead Core
- If you're looking for a cam with a maximm profile lift of .233" and no profile check, this is the cam! Aftermarket valve springs and billet lifters should be used.
- Tool Steel Billet cores are the best choice in high RPM applications.
- The two piece design of the Tool Steel Billet core allows you to advance or retard the cam to meet your application needs.
|Engine:||Briggs 5HP Flathead|
|Recommended Class:||Hot Stock|
|Target (MAX) RPM:||7000|
|Spring Pressure (In / Ex):||20 lbs|
|Valve Lash (In/Ex):||.010"|
|Ignition Timining:||30-32 Deg BTDC|